As one of the first TM Streamyx customers way back in 2001, ten years is a long time to wait for decent broadband. Streamyx was good when it launched but like anything in Malaysia, it just stagnates. Anyways, my parent’s house is among the first few areas for Unifi, unlike where I stay now which is low on TM’s priority list just because the exchange we use is pretty run down.

The speed is great but the installation purely sucks. Don’t get me wrong, the guys did a decent job and were quite clean but I think the first thing Telekom Malaysia should have done is not to assume each household has a single PC. Secondly, the installers should not assume the cable drop is next to the phone table and next to the TV set. So here goes the installer bitching about my complicated setup… see below and trying to charge my mom RM12 per meter run of CAT5 cable. Good thing I have a box (a thousand feet) handy. CAT5 cable run in my parent’s home, measured from the switch is about 85 feet (26m) to the TV area, 75 feet (23m) to the guest room, 65 feet (20m) to Rooms 1 and 2.

Original ADSL setup

Since I wasn’t around when the completed the installation, they managed to hoodwink my parents into believing that all the PCs are already connected. As my parents didn’t know how to run any network testing, all they did was try to load some websites. They even forgot to testing printing. My mom tested printing from her PC (in the guest room) though so she thought everything worked. Yes, it works but half the house is still on Streamyx!! See below diagram.

Initial Unifi Fiber Setup

I dropped at 4:30pm and first thing I did was to do a cable trace. Not liking what I found, I turned off the ADSL connection and immediately two PCs lost internet connectivity. It’s obvious why. These are the things I immediately configured or changed:

1. Change the Router’s Administrator password (defaulted to blank!)
2. Turned off the Wireless on TM’s DIR-615. (If you intend to use it, rename the Wireless Network Name/SSID)
   * The default SSID uses the customer’s name, i.e.: subscribername@unifi.
3. Disable Remote Access to the router
4. Enable Firewall, including blocking scan, DOS attacks, service filters, the whole enchilada….
5. Adjusted the DHCP port range so it didn’t conflict with my other devices that were statically assigned

Here’s how the network finally looks like:

How it looks like in the end

It looks like I’ve to be around and end up doing a fair bit of work if (when TM decides to upgrade the Sungei Way exchange) I subscribe to Unifi and their installers come to my home. It’s way more complicated that my parents!

By the way, I didn’t play around much with the phone service or the IPTV service. It’s not that attractive to me at the moment but hopefully it’ll change in the future. I’m hoping for pure SIP services from TM in terms of the voice side…